1. The cutting disc should be selected with appropriate specifications and types based on the specific material. Before use, it is necessary to check whether its specifications, speed, and purpose meet the requirements.
2. The installation of the cutting disc must be fixed, and the cutting machine must work normally with stable speed to avoid accidents.
3. When using the cutting disc, the principle of "slow first and then fast" should be followed. The initial speed should be slow and gradually accelerated to avoid deformation, damage, and other situations caused by excessive heat of the cutting disc.
4. During use, the cutting disc must be kept stable and cut perpendicular to the workpiece to avoid damage or force rebound caused by large angle friction or excessive lateral pressure with the workpiece.
5. During the cutting process, it is necessary to constantly observe the working status and surface condition of the cutting disc, adjust parameters such as speed and cutting depth in a timely manner, and immediately stop the machine for inspection if any abnormalities are found. After processing, continue to use.
6. After using the cutting disc, it is necessary to clean it in a timely manner to remove impurities such as powder and metal shavings attached to the disc surface, so as not to affect the next use effect.
7. The storage and transportation of cutting discs must be careful to avoid collision and falling, and must be kept in a dry, fire free, and direct light environment to avoid the impact of chemical corrosion on the disc surface.
